by webteam | Nov 25, 2020
Yes. Even if you have the broken part, we usually don’t weld it back on because experience has taught us that building up a skirt from new metal is a better solution.
by webteam | Nov 25, 2020
Probably! We pride ourselves on the quality of our welding and machining of damaged bores, and if you have seen our literature before you will probably already know what we are capable of. Sometimes (rarely) we come across situations where we do not feel confident...
by webteam | Nov 25, 2020
Almost certainly it will cost less to refinish all 4 bores than it would to mask the “good” ones and just fix the bad one. Of course, you should be asking yourself if the good ones are really still within specs for optimum performance, or if the whole block needs to...
by webteam | Nov 25, 2020
Probably yes, we were the first to introduce nickel/silicon carbide plating onto cast iron many years ago. We can probably help solve your problem – just contact us for more information.
by webteam | Nov 25, 2020
Most orders are completed within 10 working days and sometimes much less. We always try to provide the fastest possible turnround, but schedules can change depending on workload and other factors. View our current turnaround time
